1. Home
  2. Associate Professor Dr Abdulkareem Sh. Mahdi Al-Obaidi


Associate Professor Dr Abdulkareem Sh. Mahdi Al-Obaidi


Academic Qualification

  • PhD Major In Mechanical Engineering, University Of Technology Baghdad, Iraq
  • Master Of Science, University Of Baghdad, Iraq
  • Bachelor Of Science (Hons) Major In Aircraft Mechanical, Antonin Zapotecky Military Academy/Czech Republic, Czech Republic

Professional Qualification

No records found

Areas of Expertise

  • Engineering Sciences, Mechanical Engineering, Aerodynamics, Flight Mechanics, Gas Dynamics
  • Engineering Sciences, Mechanical Engineering, Air-Conditioning And Refrigeration

Research Interest

No records found

Publications

2024
  • Measurement enhancement of ultrasonic sensor using pelican optimization algorithm for robotic application (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
  • Maximizing energy via solar-powered smart irrigation: An approach utilizing a single-axis solar tracking mechanism (ISI-Indexed), Irrigation and Drainage - Article in Journals
  • AI and Blockchain Optimization Techniques in Aerospace Engineering - Book
  • Empowering Engineering Female Students to Improve Retention and Progression: A Program Evaluation Study Completed with Bibliometric Analysis (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
  • How Technology Can Change Educational Research? Definition, Factors for Improving Quality of Education and Computational Bibliometric Analysis (SCOPUS-Indexed), ASEAN Journal of Science and Engineering - Article in Journals
2023
  • Robust Control for Vehicle Steer-by-Wire System (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
  • Effect of Alula Span and Deflection Angle on Aerodynamic Efficiency of Bio-Inspired UAV Wings (ISI-Indexed), Unmanned Systems - Article in Journals
  • Optimum of fractional order fuzzy logic controller with several evolutionary optimization algorithms for inverted pendulum (SCOPUS-Indexed), International Review of Applied Sciences and Engineering - Article in Journals
  • Design a robust controller for congestion avoidance in TCP/AQM system (ISI-Indexed), Advances in Engineering Software - Article in Journals
  • Sustainable Carbon-Based Biosorbent Particles from Papaya Seed Waste: Preparation and Adsorption isotherm (SCOPUS-Indexed), Moroccan Journal of Chemistry - Article in Journals
2022
  • Aerodynamic Performance of Vertical and Horizontal Axis Wind Turbines: A Comparison Review (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
  • Active disturbance rejection control of wearable lower-limb system based on reduced ESO (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
  • Desiccant-based air dehumidifier and cooling system (SCOPUS-Indexed), Journal of Physics: Conference Series - Article in Journals
  • Investigation of the Blockage Correction to Improve the Accuracy of Taylor's Low-Speed Wind Tunnel (SCOPUS-Indexed), Journal of Physics: Conference Series - Article in Journals
  • Investigation of PCM thermal effectiveness towards an optimised design of cooling building envelope (SCOPUS-Indexed), Journal of Physics: Conference Series - Article in Journals
2021
  • Effect of supply and exhaust air velocity on the enthalpy and temperature exchange efficiency of a paper heat exchanger (SCOPUS-Indexed), MATEC Web of Conferences - Article in Journals
  • CDIO Initiative: A guarantee for successful accreditation of engineering programmes (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
  • The effect of supply and outdoor air temperature on the enthalpy and temperature exchange efficiency of a paper heat exchanger (SCOPUS-Indexed), MATEC Web of Conferences - Article in Journals
  • The Effects of Rice Husk Particles Size as A Reinforcement Component on Resin-Based Brake Pad Performance: From Literature Review on the Use of Agricultural Waste as A Reinforcement Material, Chemical Polymerization Reaction of Epoxy Resin, to Experiments (SCOPUS-Indexed), Automotive Experiences - Article in Journals
  • Embedded Design and Implementation of Mobile Robot for Surveillance Applications (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
2020
  • The Effect of Spoiler Shape and Setting Angle on Racing Cars Performance (SCOPUS-Indexed), Indonesian Journal of Science and Technology - Article in Journals
  • Optimization of The Performance of Vapour Compression Cycle Using Liquid Suction Line Heat Exchanger (SCOPUS-Indexed), Journal of Thermal Engineering - Article in Journals
  • Improving aerodynamic efficiency of a Skywalker drone (SCOPUS-Indexed), AIP Conference Proceedings - Article in Journals
  • Development of a hybrid vertical take-off and landing unmanned aerial vehicle for maritime application (SCOPUS-Indexed), AIP Conference Proceedings - Article in Journals
  • Improving the efficiency of spiral heat exchanger based on pressure drop (SCOPUS-Indexed), AIP Conference Proceedings - Article in Journals
2019
  • Investigation of a NACA0012 Finite Wing Aerodynamics at Low Reynold s Numbers and 0 to 90 Angle of Attack (SCOPUS-Indexed), Journal of Aerospace Technology and Management - Article in Journals
  • Execution of the C-D-I-O framework at postgraduate level in mechanical engineering (SCOPUS-Indexed), International Journal of Mechanical Engineering Education - Article in Journals
  • Investigation of a Cruising Fixed Wing Mini Unmanned Aerial Vehicle Performance Optimization (SCOPUS-Indexed), Indonesian Journal of Science & Technology - Article in Journals
2018
  • Renewable vs. conventional energy: which wins the race to sustainable development? (SCOPUS-Indexed), IOP Conference Series: Materials Science and Engineering - Article in Journals
  • Optimization Of The Performance Of Vapor Compression Cycle Using Liquid Suction Line Heat Exchanger - Article in Proceeding
  • Reduction the Noise Level of Low-Subsonic-Speed Wings Using Trailing Edge Serration - Article in Proceeding
  • Improving the aerodynamic efficiency of wings using trailing edge serration at low subsonic speeds - Article in Proceeding
  • The Influence of Winglet Configurations on the Aerodynamic Efficiency of Fixed Wing Micro Unmanned Aircraft Vehicles (MUAV) - Article in Proceeding
2017
  • Effect of atmospheric altitude on the drag of wing at subsonic and supersonic speeds (ISI-Indexed), Journal of Engineering Science and Technology - Article in Journals
  • Numerical and Experimental Assessment of Velocity with/without model inside Taylor's Wind Tunnel Test Section (ISI-Indexed), Journal of Engineering Science and Technology - Article in Journals
  • Design and Development of a Multi-Element Active Aerodynamic Package to Enhance the Performance of Taylor s Formula SAE Car - Article in Proceeding
  • Improving the Accuracy of Taylor s Wind Tunnel Measurements - Article in Proceeding
2016
  • A multi-criteria methodology for effectiveness assessment of internal cylindrical grinding process with modified grinding wheels (ISI-Indexed), INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY - Article in Journals
2015
  • Effect of Evaporator Heater Power Input and Refrigerant Flow Rate on the Performance of a Refrigerator Developing Empirical Models, Journal of Mechanical Engineering and Automation - Article in Journals
2014
  • The effect of wing geometry on lift at supersonic speeds (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals
  • Calculation and optimization of the aerodynamic drag of an open-wheel race car (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals
2013
  • The use of industrial visits to enhance learning at engineering courses (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals
  • A Blueprint for an Integrated Project Based Learning Framework in Engineering Education: A Case Study at Taylor s University (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals
2011
  • Implementation of Semi-Empirical Models to Enhance the Accuracy of Panel Methods for Drag Prediction at Supersonic Speeds (SCOPUS-Indexed), IIUM Engineering Journal - Article in Journals
  • An Integrated Portfolio and Advising System for Undergraduate Engineering Students (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals
  • CDIO Curriculum for Mechanical Engineering Undergraduate Cours (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals
2010
  • Development of the Cross-Coupling Phenomena of MIMO Flight System Using Fuzzy Logic Controller (SCOPUS-Indexed), ournal of Engineering Science and Technology - Article in Journals
2008
  • Effect of body Shapes on the Aerodynamics of Projectiles at Supersonic Speeds (SCOPUS-Indexed), Journal of Engineering Science and Technology - Article in Journals

Research

  • HARVESTING THE VALUE OF WATER: OPPORTUNITIES FOR REALIZING GRAVITY WATER AND RAINWATER HARVESTING FOR LOW-INCOME GROUP (B40) OF KAMPUNG TINATA ULU, KOTA BELUD, SABAH,  Co-researcher, 2023 to 2025, Private
  • Empowering Engineering Female Students to Improve Retention and Progression,  Co-researcher, 2023 to 2024, International
  • A cruising fixed wing mini-UAV: optimization of aerodynamics and performance for civil applications,  Project Leader, 2017 to 2019, Taylor's University

Awards and Stewardship

  • CERTIFICATE OF APPRECIATION , Conference, Taylor's University, Secretariat Committee Member , 2021
  • Certificate of Appreciation, Conference, Taylor's University, Judge , 2021
  • Award of Honor, Special, Universitas Pendidikan Indonesia, Award of honor for outstanding support and dedication , 2020
  • Elsevier Reviewer Recognition, Services, Elsevier, Journal Reviewer Award , 2016
  • Elsevier Reviewer Recognition, Services, Elsevier, Journal Reviewer Award , 2016

Paper Presented

  • My paper GOT rejected Why? and What next? , GRaF-TEC '22: The Graduate Research Forum for Technology, Engineering, and Computing (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 03/12/2022 to 03/12/2022
  • To be updated, EMPOWERING RESEARCH IN COVID-19 POST-PANDEMIC RECOVERY (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 20/10/2022 to 20/10/2022
  • to be updated, 1st International Student Conference on Engineering and Environmental Research (ISCEER) (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 11/08/2022 to 11/08/2022
  • Data Analysis and Exhibit, Research and Technology Innovation: Visions of the New Future (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 27/10/2021 to 29/10/2021
  • SOCIETY 5.0: IMPACT, CHALLENGES & ADAPTION , The 3 International Conference on Informatics Engineering, Science & Technology (INCITEST) (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 11/06/2020 to 11/06/2020
  • Competitive strategies in higher education to face Industry 4.0, 2nd International Conference on Informatics, Engineering, Science & Technology (INCITEST2019) (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 18/07/2019 to 18/07/2019
  • An innovative engineering educational framework to address the fourth industrial revolution challenges, 4th Annual Applied Science and Engineering Conference (AASEC 19) (CONFERENCE), PLEANARY/KEYNOTE SPEAKER , 24/04/2019 to 24/04/2019
  • Optimization of the performance of vapor compression cycle using liquid suction line heat exchanger, International Engineering Research Conference, 10th Eureca 2018 (CONFERENCE), ORAL PRESENTER , 27/06/2018 to 27/06/2018
  • The Influence of Winglet Configurations on the Aerodynamic Efficiency of Fixed Wing Micro Unmanned Aircraft Vehicles (MUAV), International Engineering Research Conference, 10th Eureca 2018 (CONFERENCE), ORAL PRESENTER , 27/06/2018 to 27/06/2018
  • Improving the aerodynamic efficiency of wings using trailing edge serration at low subsonic speeds, 11th Eureca 2018 (CONFERENCE), ORAL PRESENTER , 28/11/2018